View Single Post
Old 03-04-2009, 12:03 AM   #14 (permalink)
tjmr2
Cage Fighter
 
Join Date: Jan 2008
Location: Colorado
Posts: 409
Thanks: 0
Thanked 62 Times in 59 Posts

My Google Map



Have you pulled a spark plug to see if it's wet with gas after cranking the engine? It may not be wet but you should be able to smell some gas if it cranks and doesn't start.

Are you sure you are getting spark? Hook up a timing light or:

Pull a wire off a plug, connect a new plug in the wire, hold the base against a ground and have someone crank the engine. Don't just use the plug wire when you do this test as the system needs the resistance of the spark plug.

If you have spark a shot of starting fluid in the intake might just be all you need to get it to turn over.

Good luck.
tjmr2 is offline   Reply With Quote
 
Page generated in 0.13876 seconds with 16 queries