|
you mean it came from a geo prizm with a 7afe? BIG difference... 7age doesn't "exist" stock..... metro does not have C series transmissions in them.
If you have a C series from a geo prizm, then all you need to do is have yours and the new trans side by side. Put both in neutral, unbolt the selector shaft from the new trans and pull it out. Unbolt the selector shaft and the cap from the mr2 trans. Drill a hole through the front of the FWD trans where you pulled the selector shaft in the old one (if you drill too deep it isn't a big deal... all that will happen is that the seal will push in too far and the dust boot won't slip over it). Install the mr2 selector shaft and use the stock cap to cap off the hole where the shaft came from for FWD.
|