Quote:
Originally Posted by MR2nr-v
Hey guys... I recently bought a EMSpowered exhaust for my 2... i unfortunately ran into a problem in the process of installation 
It seems i have this stabilizer bar that is keeping me from fitting the exhaust... I purchased the exhaust 4 a "Turbo" since i have a 2nd gen 3SGTE in it, but i have a NA model if that matters
My ? is, can i go w/ out this bar or what can u guys suggest cuz i REALLY want this exhaust in my car but it seems its 2 big??
I appreciate ur time
http://i535.photobucket.com/albums/e...IMG_0992-1.jpg |
Looks like the rear sway bar but anyways if your trying to replace the stock headers or remove stock down pipe you have to go through that and drop the sub frame atleast i did,or if your trying to put the ems duals just loosen the four bolt but not completely remove it,drop the sub frame by half an inch
enough to loosen the bolts on the bushing for the swaybars so you can move the bar around while trying to install the mid pipe but first try to get your stock exhaust out of the way first.the key is to make sure you lift the rear of the car high enough so you have allot of room to work with, let me know how its goes.