i recently put in a suspension techniques sway bar in the front, only because mine was bent from something the previous owner did and i found one on ebay and didn't want to miss out,, needed it.
i also changed over to adjustable end links only because one was bent along with the sway bar,
i've read it can throw the balance off for cornering, it definitely under steers more the stiff front end is cool, but is off balance.
my question is ,;'''
does anyone think a good way to maybe try to balance the car out would be to straighten the old sway bar end links, reinstall them move the adjustable links to the rear and shorten them a tad , fit the rear sway bar with some polyurethane bushings to try to maybe gain some stiffness in the rear,
any input would be cool, im on a real budget and facing the reality that money is low and trying to make the best out of this ride.
i have the whole poly bushing kit the car is a wreck and needs more important things but am trying to restore the suspension.
also are the suspension technique springs a decent upgrade for the s/c model aw11' i've read there not stiff but supposedly there 90-280 progressive rate according to the mr2 write up:
MKI MR2 Write-ups
my plans are to buy the rear springs i see available and heat the front springs to match height
this is all for maintaining a close budget am trying to get paint in this summer too does anyone think this idea has any potential,
yes i am crazy ,