Toyota MR2 Message Board - View Single Post

MANDALAY · 04-12-2009, 05:49 AM

Just finished drawing up my Catch can set up.
Im using the OEM 3SGTE one with the factory holder.
It will sit on another machined aluminium bracket which gets its support again using factory point on the oil return line.
The 3SGTE has the oil drain from the catch can going back into the block but im not doing that. On the aluminium bracket it will incorporate a little tank to collect the oil. The lid will have a dipstick to see if there is any oil and drain accordingly.

04-12-2009, 05:49 AM	#392 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 4,209 Thanks: 136 Thanked 112 Times in 107 Posts My Google Map iTrader Rating: (6/100% )	Just finished drawing up my Catch can set up. Im using the OEM 3SGTE one with the factory holder. It will sit on another machined aluminium bracket which gets its support again using factory point on the oil return line. The 3SGTE has the oil drain from the catch can going back into the block but im not doing that. On the aluminium bracket it will incorporate a little tank to collect the oil. The lid will have a dipstick to see if there is any oil and drain accordingly. Last edited by MANDALAY; 04-12-2009 at 07:26 AM..