Toyota MR2 Message Board - View Single Post

efx · 04-15-2009, 05:35 PM

If I try to pull that any more it will start tearing apart. It's pretty tight and won't allow you to pull it any more, believe me, I tried, but thanks for the suggestion. I put this project on the side for now. It's a bit cold and I want to fix that whole console again. I cut a piece of wood to place under that area. On side should be 26mm and to other should be 22mm. I used 20 and 25, but found it just a tiny bit short. The larger number will raise it a bit, but once you push it down it will push up the bent parts in the middle and allow you to screw the console in as well. My numbers let me screw it without pushing it, but I think the larger numbers would work. I'll use fiber glass to add that to the console later.

04-15-2009, 05:35 PM	#12 (permalink)
efx Cage Fighter Join Date: Apr 2009 Location: Los Angeles, CA Posts: 211 Thanks: 0 Thanked 4 Times in 4 Posts iTrader Rating: (1/100% )	Can't do it If I try to pull that any more it will start tearing apart. It's pretty tight and won't allow you to pull it any more, believe me, I tried, but thanks for the suggestion. I put this project on the side for now. It's a bit cold and I want to fix that whole console again. I cut a piece of wood to place under that area. On side should be 26mm and to other should be 22mm. I used 20 and 25, but found it just a tiny bit short. The larger number will raise it a bit, but once you push it down it will push up the bent parts in the middle and allow you to screw the console in as well. My numbers let me screw it without pushing it, but I think the larger numbers would work. I'll use fiber glass to add that to the console later.