[puretone]

Originally Posted by mr220v

Here are a few pictures of the harness I make for the beams. This particular harness was based off of a badly cut beams engine harness and is for a 91 mr2:

http://69.15.41.214/mr2/beamspics/beamsharness1.jpg

http://69.15.41.214/mr2/beamspics/beamsharness2.jpg

http://69.15.41.214/mr2/beamspics/beamsharness3.jpg

Notice the adapter plug for the ecu plug on the mr2 body harness. There's also a power connection for the msd tach adapter most people use.

Here's where the harness was cut originally:

http://69.15.41.214/mr2/beamspics/cutbeams.jpg

hey mr220v, been meaning to ask you since for > ever....

can I wire my OBD plug right up close to the ECU? As in splice it into the proper wires right by the ECU? Are there any specific wires I should be splicing into, or is it just all about splicing right into the correct/matched colour-coded wires?