Toyota MR2 Message Board - View Single Post

efx · 04-17-2009, 04:30 PM

Well, I got an 85 and the manual states about 10mm for thinckness I think it was. Which means that would be 20mm for the thickness, but what do I know. Check your book because the 89 is different from the 85, 86 from what I have been reading...As for the rotors though, you should just get yourself some new ones and be safe if it's that bad.As for the noise, semi metalics were doing that to me so I had to change them. It got pretty annoying so i just changed them.

04-17-2009, 04:30 PM	#5 (permalink)
efx Cage Fighter Join Date: Apr 2009 Location: Los Angeles, CA Posts: 198 Thanks: 0 Thanked 4 Times in 4 Posts iTrader Rating: (1/100% )	10 inches? Well, I got an 85 and the manual states about 10mm for thinckness I think it was. Which means that would be 20mm for the thickness, but what do I know. Check your book because the 89 is different from the 85, 86 from what I have been reading...As for the rotors though, you should just get yourself some new ones and be safe if it's that bad.As for the noise, semi metalics were doing that to me so I had to change them. It got pretty annoying so i just changed them.