Toyota MR2 Message Board - View Single Post

biorchang · 04-28-2009, 07:36 PM

You just connect the hose from the Valve Cover to the catch can and from there back to the intake.

It is the hose on the pipe that is pressed into the driver side of the Valve Cover.

04-28-2009, 07:36 PM	#6 (permalink)
biorchang 94 Turbo Join Date: Mar 2006 Location: Austin, TX Posts: 1,030 Thanks: 16 Thanked 52 Times in 51 Posts iTrader Rating: (9/100% )	You just connect the hose from the Valve Cover to the catch can and from there back to the intake. It is the hose on the pipe that is pressed into the driver side of the Valve Cover.