Toyota MR2 Message Board - View Single Post

MANDALAY · 05-09-2009, 06:26 AM

6

Water hard lines for the A/W set up
7

8

Made a bracket to hold the OEM catch can. Next to it is a resivour to hold any oil drain as i didnt want it to be recirculated back to the engine
9

View from top . All hiden under the inlet manifold

The rest of the body of the ROTREX will get a light coat of black paint
10

View from top . See no drive shaft interferance

05-09-2009, 06:26 AM	#410 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 4,210 Thanks: 136 Thanked 112 Times in 107 Posts My Google Map iTrader Rating: (6/100% )	6 Water hard lines for the A/W set up 7 8 Made a bracket to hold the OEM catch can. Next to it is a resivour to hold any oil drain as i didnt want it to be recirculated back to the engine 9 View from top . All hiden under the inlet manifold The rest of the body of the ROTREX will get a light coat of black paint 10 View from top . See no drive shaft interferance Last edited by MANDALAY; 05-09-2009 at 06:43 AM..