Quote:
Originally Posted by oldsoul45
I am about to go ahead with a project of turbo-ing a red top beams
setup is planed as a low boost install using a TD05 turbo unit,custom manifold and down pipe,internal waste gate,small inter cooler front mounted(Celica Gen)Sard induction,using standard fueling and internals,the engine is very Strong and only covered 70 kilometers.comes with LSD and c-one flywheel.aim to get 240bhp...anything i need to look out for
|
Fuel pump & Injectors is what I will yell at you about. Upgrade pump for sure, either 3SGTE pump or a Walbro 255. You will need an FPR unit both for managing the pressure during boost and off-boost. You can go the uprated injectors route, but that would require the ECU to be tricked and/or piggy-backed and/or different controlling unit.
I am not so sure if your OEM pistons/rods/rings/ringlands will be so happy if you plan to make 240HP all the time.....giving some room for boost spikes....