View Single Post
Old 06-10-2009, 12:47 AM   #8 (permalink)
Parkins
No Skills
 
Join Date: Feb 2009
Location: Boulder, CO
Posts: 38
Thanks: 1
Thanked 1 Time in 1 Post

My Google Map



Quote:
Originally Posted by sbagdon View Post
I believe the steering rack bushings are usually referring to the inner rack bushings. Don't people replace those to get rid of clunk, not play?

If you have straight-line tracking issues at highway speeds, sounds to be tie-rod ends. Did you replace those? (yet)?
I did not replace those. I'll have to look into that, thanks

Quote:
Originally Posted by palos View Post
What were your final alignment specs? Did the shop say anything was loose, but proceeded with, or were directed to continue with, the alignment anyway?
They did say the steering rack was loose... is that something I can tighten or need to just straight up replace?

Quote:
Originally Posted by mustclime View Post
sounds like an alinment issue to me....that or one or more bad balljoints.
I do have a small tear in the driver side front ball joint... I have been meaning to replace that.

Quote:
Originally Posted by Chubbz View Post
i had the same problem and it turned out both my rear wheel bearings were shot.
I was thinking that. I'll have to look into getting some. Any recommendations for good prices?
Parkins is offline   Reply With Quote
 
Page generated in 0.20385 seconds with 16 queries