Well I got the fuel pump etc in my 87 MR2. Got it started and the clutch wouldn't release. As the previous owner had problems with clutch release I replaced both the master and slave cylinder with new units. Bled the clutch with a vacumn bleeder., Still no clutch. To make a long, frustrating story short, I have bled it with a vacumn bleeder, with someone pumping the clutch and by leaving the bleeder open and letting gravity do the work with both the clutch pedal up and depressed over long periods of time. I can see the slave cylinder moving the fork. I even made an extension for the rod on the slave cylinder to make up a little of the free play. Have pumped 2 qts of brake fluid through it through all of this. Still will not release. Can I assume the problem lies with the clutch/pressure plate? Thanks for any advice.
|