Toyota MR2 Message Board - View Single Post - 20V MK1 Engine Swap Troubleshooting... first startup

Raptor13x · 06-15-2009, 07:32 PM

Just finishing up the BT 20v swap, and I'm working on troubleshooting the last few details. It's cranking but not starting right now.

I checked for spark- it has spark. I sprayed some starting fluid in to make sure it's not a fuel issue- still nothing. Compression is good.

Every once in a while, it sputters a bit and stalls out.

Any thoughts on what to check next?

06-15-2009, 07:32 PM	#1 (permalink)
Raptor13x Legendary Join Date: Apr 2006 Location: Farmington Hills, MI Posts: 3,997 Thanks: 7 Thanked 44 Times in 37 Posts My Google Map iTrader Rating: (5/100% )	Troubleshooting... first startup Just finishing up the BT 20v swap, and I'm working on troubleshooting the last few details. It's cranking but not starting right now. I checked for spark- it has spark. I sprayed some starting fluid in to make sure it's not a fuel issue- still nothing. Compression is good. Every once in a while, it sputters a bit and stalls out. Any thoughts on what to check next?