Quote:
Originally Posted by baktasht
SpoolU, what kind of problems did you have with the install? We've sold around 100 of these over the last 2 years and there have been maybe 4 or 5 people with installation problems.
|
1. The thickness of the hanger going towards the b-pipe that goes through the rubber mount (on the engine brace) is too thick for the rubber hole. They had to drill the rubber hole larger.
2. The hanger holes for each end of the tail pipe were too small for the stock bolts to fit through, and they had to drill out the holes so that the bolts could fit.
3. Missing locknuts for the hangers that hold up the mufflers. Since the stock ones are welded onto the stock muffler, you assumed that people could get those off.
-M