|
Competition notes....
Since I did much Road Racing and subsequent Autocrossing I found that adding a "Zerk" fitting to the front bearing caps virtually ended the endless bearing failures and allowed me (the pit crew?) to grease front bearings as needed.
The Semi-Metallic S/C clutch is a good one as are the axles and gave me service well past 200,000 miles!! I greased rear bearings at 6 month intervals successfully.
You might be interested in knowing that 14" Goodyear Sportsman Racing Slicks will fit into the front and rear wheel wells quite easily on the OEM S/C aluminum rims.
I would advise upgrading beyond semi-metallic brake pads if you intend to run any hard competition at high speeds, the discs are quite adequate and do not require replacement.
Happy Motoring Ya'll
mr2tim
Supercharzed Toyz Race Team
Boca Raton, Fl
|