Toyota MR2 Message Board - View Single Post

Jon3sgte · 07-04-2009, 01:51 PM

It is very easy to do. Buy an aftermarket receiver harness from any audio store. Usually $20. I'm guessing your car already has one. if so, use that one. It makes the new radio plug and play. All the wires are color coded. The surround comes out with 3 phillips screws. 2 under the ashtray and 1 under the key hole for the ignition. It then just pulls off. i would recomend getting a pocket for under the new stereo. I think new from toyota is $30-40. Or, if you buy an aftermarket install kit, it may come with a pocket. $20-25. you should be able to have the whole project done in under an hour.

07-04-2009, 01:51 PM	#2 (permalink)
Jon3sgte Cage Fighter Join Date: Nov 2007 Location: Tucson, AZ Posts: 126 Thanks: 8 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	It is very easy to do. Buy an aftermarket receiver harness from any audio store. Usually $20. I'm guessing your car already has one. if so, use that one. It makes the new radio plug and play. All the wires are color coded. The surround comes out with 3 phillips screws. 2 under the ashtray and 1 under the key hole for the ignition. It then just pulls off. i would recomend getting a pocket for under the new stereo. I think new from toyota is $30-40. Or, if you buy an aftermarket install kit, it may come with a pocket. $20-25. you should be able to have the whole project done in under an hour.