|
To be honest I wouldn't bother with stock harness I would chop it out and rewire for stand alone. Just easier in the long run And to turbo you engine is not that hard it just requires a bit of messing around tuning (really important that bit), supercharging is a little more technical but not super hard I see people do it all the time round where I live. Turbo is easier because it doesn't deal with pulley speeds and where to put it. I <3 turbos if you do it right you will have great midrange and topend if you turbo match correctly
I have zero wiring ability and put a 3sge in my mkI just by reading diagrams over and over and over again then probing around with a multimeter. Also put a turbo on a honda but just putting a manifold on it and a rising rate FPR on it, chipped the computer and bam instant horsepower.
My mind just finds this a piece of chocolate cake not sure about OP though.
|