View Single Post
Old 07-06-2009, 07:13 PM   #21 (permalink)
Adrians89MR2SC
Build,Drive,Sell,Repeat
 
Join Date: Oct 2007
Location: McDonough, Ga
Posts: 895
Thanks: 9
Thanked 25 Times in 24 Posts

My Google Map



Send a message via AIM to Adrians89MR2SC
I've changed the idle control valve with another one that is known to work .. both were clean though ..

its a 5 speed .. and the a/c does not work . it isnt hooked up, speed sensor is missing, and idle up is disconected (will be connected this weekend when that guy comes and helps me finish putting it all back together)

we took the complete intake off of the engine and cleaned everything with all new gaskets .. so theres no possibility of a vacuum leak this time

I have checked all the terminals, all are clean and checked the signals all the way back to the ecu to make sure they read the same as straight off the sensors

injector solenoid? .. where is that

the ground isnt connected where the filler neck is .. I'll be sure to connect that up

the ones on the fuel rail I know are good .. found one wasn't connected when that guy first came over to check it out


I guess I'll just have to wait and see if he comes over this weekend to get it all buttoned up and go from there .. hopefully it fires right up and I'm good to go


but he knows a bunch about these engines .. his has all sorts of stuff like forged internals, nos, crank pulley, bigger intercooler, cams, etc on his 88 mr2 sc he drives every day

he's gonna reset / check all my sensors again like the tps and afm

hopefully it'll work
Adrians89MR2SC is offline   Reply With Quote
 
Page generated in 0.13074 seconds with 16 queries