|
Inside edge wear can be caused by toe-out, and/or excessive negative camber. Alignment specifications are relative, i.e. if the specs call for 1/8th toe in, and you are at 1/16th toe in -- relatively you are toed out from the specs. Until your lower ball joints are replaced, the alignment could cause wandering based on the play caused by the ball joints. That may be the reason for the pulling issues. Your negative camber may be reduced after the new ball joints.
If your tires were worn on the inside edge, new tires with an even wear pattern, can change the handling of the car, for better or worse.
The improperly sized front tires should be replaced. Hopefully, Kumho makes the appropriately size (and speed rated) model to fit the front.
|