Toyota MR2 Message Board - View Single Post - White smoke coming from valve cover tube...

webyosan · 07-16-2009, 01:51 AM

It's blowing a lot of white smoke when I disconnect the rubber hose from engine valve cover to intake, BUT no sign of white smoke from exhaust at all. It's not a head gasket since coolant is full and not milky mix on the oil or residue on oil cap. I feel this could be the rings that are giving out and thus I might do a compression test tomorrow...Hopefully I can find some answers from you guys..Thanks!

BTW- It burns oil a little but not that bad, the engine is still shaking after putting in new front/rear engine mount.

07-16-2009, 01:51 AM	#1 (permalink)
webyosan No Skills Join Date: Sep 2008 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	White smoke coming from valve cover tube... It's blowing a lot of white smoke when I disconnect the rubber hose from engine valve cover to intake, BUT no sign of white smoke from exhaust at all. It's not a head gasket since coolant is full and not milky mix on the oil or residue on oil cap. I feel this could be the rings that are giving out and thus I might do a compression test tomorrow...Hopefully I can find some answers from you guys..Thanks! BTW- It burns oil a little but not that bad, the engine is still shaking after putting in new front/rear engine mount.