Toyota MR2 Message Board - View Single Post - AT Power non DBW 2GR-FE Throttle Body

mr2magic · 07-17-2009, 08:05 AM

I'm assuming that powertrain would have to be mounted longitudinally? If this were the case then there is definitely no room in the stock engine bay for this. Mounted latitudinally might be an option (prolly not either judging by the size) but then you would have to make major changes to the gearbox.

I'm guessing that's why you've had no resonance as yet

Now if you'd make a TB for the 3S seriesof motors.........

07-17-2009, 08:05 AM	#3 (permalink)
mr2magic deutsch type skillz Join Date: Feb 2008 Location: Hannover, Germany Posts: 1,201 Thanks: 107 Thanked 53 Times in 49 Posts My Google Map iTrader Rating: (3/100% )	I'm assuming that powertrain would have to be mounted longitudinally? If this were the case then there is definitely no room in the stock engine bay for this. Mounted latitudinally might be an option (prolly not either judging by the size) but then you would have to make major changes to the gearbox. I'm guessing that's why you've had no resonance as yet Now if you'd make a TB for the 3S seriesof motors.........