Quote:
Originally Posted by Timon
There were no clips in mine either. All screws. Make sure you pull the radio bezel off too, that is hold the front end down.
Once you get the center console out it's pretty much self explanatory from there. You'll see bolts holding the shifter assembly down (4, I think, 12mm or 14mm). Make sure to detach the shifter cables before pulled the base out. Once you have the base out you'll have the pry the shifter out of its socket. There is a small clip in the plastic holding it down, remove that first. You'll likely need some help with the neutral return spring and putting it all back together.
|
I installed two short shifters, it's super easy.
you don't have to undo the shifter cables as you can just pop the one off and take off the clip for the left side one and unbolt the 4 bolts and drop the assembly, repack the cup with grease while you are in there, it's worth it.
I'll do a write up tomorrow when I lube my shifter cables if you wanna wait.