Quote:
Originally Posted by Koldsauce
I'm diggin the responses, but for the followup question, anyone know how to replace ball joints? I took a look at the BGB but it was just like, "take these bolts off then replace" I really couldn't get the ball joints out of the lower control arm's bushings. Do I have to take off the LCA and burn out the bushings? I have Urthane (sp?) replacement bushings but I'd rather do that some other day because I heard it takes like 4 hours to do that...
Also, the front ST sway bar was a really easy install, but has anyone done the rear one? I couldn't find the exact points to drill the new holes, if anyone has pictures I would appreciate it. Thanks in advance!
|
The ball joints are not "burn out" - they just un-bolt. Two bolts at the bottom and then one nut (retained with a cotter pin) that points down.
Don't bother burning out the rubber bushings - just get a ball joint press and use that - far less destructive and a lot safer.