Toyota MR2 Message Board - View Single Post

puretone · 08-17-2009, 04:07 PM

RedTop BEAMS is either out of an SW20/1 MR2 or ST202 Celica <---6th Gen, should be even easier for you....my guess is it will be super easy if you get a Celica BEAMS clip & if you're engine *was* a 5SFE....I'm not sure if the 6th Gen Celica with the 7AFE is a headache to get an S-series engine into or not.

CORRECTION:
You have the 6th Gen Convertible eh? So you could only have either the 3SFE or 5SFE in that engine bay. Dude getting the RedTop BEAMS in there will be a walk in the park for you!!!!
Don't worry about the Tacho, it will probably work fine without any mods.
Just make sure you get the UNCUT wiring, ECU, MAF, O2 Sensor....possibly the tranny would be nice too, might be younger & better shape than yours....see if it's got the LSD! Everything else should be super simple

08-17-2009, 04:07 PM	#4 (permalink)
puretone Beams Owners Group Join Date: Aug 2006 Location: Aruba, #1 BEAMS Engine on the Island Posts: 2,339 Thanks: 28 Thanked 57 Times in 56 Posts My Google Map iTrader Rating: (1/100% )	RedTop BEAMS is either out of an SW20/1 MR2 or ST202 Celica <---6th Gen, should be even easier for you....my guess is it will be super easy if you get a Celica BEAMS clip & if you're engine was a 5SFE....I'm not sure if the 6th Gen Celica with the 7AFE is a headache to get an S-series engine into or not. CORRECTION: You have the 6th Gen Convertible eh? So you could only have either the 3SFE or 5SFE in that engine bay. Dude getting the RedTop BEAMS in there will be a walk in the park for you!!!! Don't worry about the Tacho, it will probably work fine without any mods. Just make sure you get the UNCUT wiring, ECU, MAF, O2 Sensor....possibly the tranny would be nice too, might be younger & better shape than yours....see if it's got the LSD! Everything else should be super simple