FEW MORE PARTS
1
New shroud , now holding the Setrab oil cooler with its own fan to keep the Rotrex oil temp under control. With another fan 5.5 inch for the OEM fan computer
2
Tee made for vacuum supply for the OEM BOV. Tee put in the PCV hose from the inlet manifold
3
3 BAR Map sensor
4
Bracket made to hold the MoTec 3 BAR map sensor
5
6
Vent pipe to redirect the CRANK VENT to the OEM oil catch can
7
Bracket made to hold the 2 oil lines for the Rotrex and the vacuum line for the brakes
8
Tee holding the oil temp sensor for the Rotrex oil supply
9
Made a fitting to hold an OEM 3SGTE air fiter for the MAP sensor.
Easiest way to do it instead of stuffing around with the inlet manifold