Quote:
Originally Posted by fvillota
OK the brass shift cables go at the end of your transmission cables.
where they plug into your transmission.
unhook the cable and you'll see its a little round rubber push it out and put the brass bushing in
I'm guessing that the shifter base bushing are the little rubber bushings that hold the shifter assembly in place. take em off and install the brass ones.
|
Yup! I installed that stuff on my MK1. The shifter cable bushings should come with a piece of sandpaper, use that to clean the pins and such. The bushings are a great cheap mod, for my mk1 the shifting felt awesome. Just make sure not to twist the cables.