Toyota MR2 Message Board - View Single Post - 20V MK1 Engine Swap 3 bolts for exhaust manifold enough?

mr3 · 08-31-2009, 04:01 PM

I did what you said on the timing belt side. Then I had to grind the transmission side down to get it to fit. It's holding right now with 4 and it's a temperary thing till my dad goes back to his old job.

The only thing left to do on this thing started is spark plugs. The ones that are in there are black and I cant keep the car running so hopefully replacing them will allow it to start.

Thanks mr220v for all of your help throughout this project.

08-31-2009, 04:01 PM	#3 (permalink)
mr3 unskilled Join Date: Jun 2008 Location: Plymouth Mtg, Pa Posts: 2,408 Thanks: 24 Thanked 98 Times in 93 Posts iTrader Rating: (7/100% )	I did what you said on the timing belt side. Then I had to grind the transmission side down to get it to fit. It's holding right now with 4 and it's a temperary thing till my dad goes back to his old job. The only thing left to do on this thing started is spark plugs. The ones that are in there are black and I cant keep the car running so hopefully replacing them will allow it to start. Thanks mr220v for all of your help throughout this project.