I know,still looking 4 one to
Update !
Finally got the sw20 end exhaust part fitted correctly on the black wa11 with the 20V.
Cut the middle part out after the flex part [not the cat,.do not have one
] and weld a strait pipe in its place to make room fore it,.made a strong stiff rubber suspension on it to fit the original set up but in a way it can not move to much.
The first attempt I crack the outlet manifold
there was to much movement and that gave tension.
But now it works !
And the sound,.the sound
OMG !
Way more quiet than the original end pice and it sounds darker !
It sounds a lot like a old type 911 and it is the finishing touch on this project
