Alrighty time for update me thinks...
WTF Auto has finished with the car and done a number of things I needed done. To name a few I've had an air filter and plate installed for the ITBs, oil pressure, oil temp and water temp sensors installed for gauges, new radiator mounts installed, fixed damaged brake line, new clutch bearing for tranny and engine was prepped and fitted accordingly with all fluids topped up. The car however doesn't fired up as of yet so I need to go over all the wiring to diagnose the issue!
I had a quick look on Saturday and couldn't find anything out of place, all plugs were in correctly, fuel was flowing and power seems to be in the right locations but doesnt fire up, turns over (click, click, click) but no ignition. I've hooked the MOTEC up to my laptop via the USB dongle but the MOTEC program can't find the MOTEC via the USB... there is power going to the MOTEC atleast through the main wire but will have to check the cables throughly next weekend when I have more time.
So not going yet but will leave a few more close up photos for you all for now!
Oil sensor installed & bottom radiator mounts
Plumbed for map sensor (from throttle, brake booster & fuel to map sensor)
Mount for throttle cable
Oil & temp sensors
