Quote:
Originally Posted by magnesmurf
Thanks for the info.
Driving and braking lights are the same? Doubble of both in each light?
|
if you're using the 91-93 harness you will have double parking lights, and will become brighter as you break
using 94+ harness will leave you with 1 parking light on both sides. both will light up when you break.
91-93 harness w/ 94 tail lights
94+ harness
Quote:
Originally Posted by Don't Worry, It's Just Me
so has any one successfully made some reverse lights with the 94 tails with the 91-93 center panel?? pics?
|
there's been many topics on this. whether to do what mark tried to do install reverse lights into the 94 tail lights. but if you read the previous post it's a lot of work and no one that's on the board has done it or has been quiet about it
you can splice/rewire bulbs to be used as reverse lights and place them where ever you like. Some people have bought a small led strip wired it to reverse and placed it above the license plate. You can also buy Ben's center panel Badges that light up and wire them to reverse or if you are very technical have a switch board, where when you reverse it will light up white, and when you are in park/drive it'll go to w/e color you would like. i have thought of the idea of trying to make it look like corvettes where there's two bulbs around the license plate. this would be most clean look i would think, but i haven't gotten around to it. it would be easier if i had a Euro back bumper, so that i would have space for the lights to go on the side.
Ben's kit
http://www.mr2.com/forums/interior-m...ame-plate.html