View Single Post
Old 09-17-2009, 01:28 PM   #3 (permalink)
mr2 mad
No Skills
 
Join Date: Sep 2009
Posts: 5
Thanks: 1
Thanked 0 Times in 0 Posts
Blog Entries: 1





Quote:
Originally Posted by mrjimmyx View Post
so what do you have exactly? look like you have wiring harness but no body harness correct? and the car is a 91 3sge? check to see if everything is pluged up right. then check fuses, relays, grounds. did you get an engine or clip?
hi mate thanks for the interest in this it is driving me mad i have tried everthing! the car is a g reg 1990/91 and the engine is out of a 1997 so i was told, you are right i have the harness for the engine only not for the car the engine i got off ebay, it was surposed to come with the ECU but it did not so i got one from ebay with the coil and igniter, and it is off a 1996 mr2 i now think this may be the problem? all the plugs are plugged in all the fuses are fine and so are the relays, it seems to only run on the cold start it does not seem to get fuel through the injectors.do you know of anywhere i can get a wiring diagram for a 97 3s-ge, any advice will be grateful thanks again dan
mr2 mad is offline   Reply With Quote
 
Page generated in 0.17030 seconds with 16 queries