Toyota MR2 Message Board - View Single Post

Paul Woods · 09-21-2009, 02:03 PM

Quick update, here is yesterdays work on the exhaust.I have used a TVR T350 silencer as the primary box.I chopped the audi header flanges off and welded my own 3 bolt flanges on instead...

Then fed both banks into the TVR box...

The TVR box is mounted ridgidly to the transmission by brackets and will move with the engine, so no need for flexi sections until further downstream.From the TVR box i am going down through the floor where i will make up a left and right system with the final silencers on each side...

The trunk wall will be rebuilt around the exhaust to give me some storage space back and the whole thing will be very heavily heat protected where i can...... how will this sound? I am not far off finding out!

09-21-2009, 02:03 PM	#65 (permalink)
Paul Woods Don't talk it, do it. Join Date: Feb 2006 Posts: 535 Thanks: 10 Thanked 24 Times in 21 Posts iTrader Rating: (0/0% )	Quick update, here is yesterdays work on the exhaust.I have used a TVR T350 silencer as the primary box.I chopped the audi header flanges off and welded my own 3 bolt flanges on instead... Then fed both banks into the TVR box... The TVR box is mounted ridgidly to the transmission by brackets and will move with the engine, so no need for flexi sections until further downstream.From the TVR box i am going down through the floor where i will make up a left and right system with the final silencers on each side... The trunk wall will be rebuilt around the exhaust to give me some storage space back and the whole thing will be very heavily heat protected where i can...... how will this sound? I am not far off finding out! Last edited by Paul Woods; 02-06-2010 at 12:42 PM..