Toyota MR2 Message Board - View Single Post

UglyMR2 · 09-23-2009, 02:28 PM

Well, my name is Chris and I have a 93 MR2 Turbo with a host of mods but not yet finished. I originally got into cars when I purchased an Eagle Talon TSI and the turbo bug bit me. Since then I have owned 2 Alltracs and a Supra with mild mods and then I have had over 10 DSM's including every turbo model and gerneration up to the Evo 9. Right now though I have a 91 Galant VR4 as a project that I have owned for 4 years and the MR2. As it sits the MR2 needs some motor work as I think it has a blown piston (waiting for my new leakdown tester). But from there I want to finish all the mods on it to have a well rounded 11 sec car.

Current Mods list:
Greddy 20g turbo kit
Greddy Exhaust
HKS Blow off valve
TRD front and rear strut tower bars
TRD struts and springs
TRD crossed drilled rotors and pads
Tom scoop over filter
HKS Boost gauge and EVC IV
Upgraded clutch of some sort

all of the current mods were done by previous owner and would not be my first choice

Future mods once motor is fixed or replaced:
Cams
Fuel Pump
Injectors
Intercooler and piping
Something for tuning

09-23-2009, 02:28 PM	#1 (permalink)
UglyMR2 I clean cars really good! Join Date: May 2009 Location: Ketchikan, Alaska Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Up here in Alaska Well, my name is Chris and I have a 93 MR2 Turbo with a host of mods but not yet finished. I originally got into cars when I purchased an Eagle Talon TSI and the turbo bug bit me. Since then I have owned 2 Alltracs and a Supra with mild mods and then I have had over 10 DSM's including every turbo model and gerneration up to the Evo 9. Right now though I have a 91 Galant VR4 as a project that I have owned for 4 years and the MR2. As it sits the MR2 needs some motor work as I think it has a blown piston (waiting for my new leakdown tester). But from there I want to finish all the mods on it to have a well rounded 11 sec car. Current Mods list: Greddy 20g turbo kit Greddy Exhaust HKS Blow off valve TRD front and rear strut tower bars TRD struts and springs TRD crossed drilled rotors and pads Tom scoop over filter HKS Boost gauge and EVC IV Upgraded clutch of some sort all of the current mods were done by previous owner and would not be my first choice Future mods once motor is fixed or replaced: Cams Fuel Pump Injectors Intercooler and piping Something for tuning Last edited by UglyMR2; 09-23-2009 at 03:07 PM..