Toyota MR2 Message Board - View Single Post

MANDALAY · 10-04-2009, 09:00 AM

All additions on the fuel rail. Everything clears

Showing the solid pipe for the the vacuum line for the BOC. One end goes to the BOV and the source is the tee which will be put in line with the vacuum brake line

Used a std hose from the 3SGTE Turbo . Ideally it had the bends all in the right places, so as to line up with the brake hose and also clear the dampener and the fuel line. This was not by chance i viewed over 100 hoses for the right one

Acess to the sensor possible between the runners

TEE

10-04-2009, 09:00 AM	#524 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 4,209 Thanks: 136 Thanked 112 Times in 107 Posts My Google Map iTrader Rating: (6/100% )	All additions on the fuel rail. Everything clears Showing the solid pipe for the the vacuum line for the BOC. One end goes to the BOV and the source is the tee which will be put in line with the vacuum brake line Used a std hose from the 3SGTE Turbo . Ideally it had the bends all in the right places, so as to line up with the brake hose and also clear the dampener and the fuel line. This was not by chance i viewed over 100 hoses for the right one Acess to the sensor possible between the runners TEE Last edited by MANDALAY; 10-04-2009 at 09:39 AM..