Also today I pulled the old pan, oil pump and windage tray and pickup tube. Cleaned all of the FIPG off of the block and cleaned the windage tray and pick up tube in the parts washer. Installed the new oil pump and put the studs in the block to mount the new moroso pan.
I installed the pan with Toyota FIPG and the proper torque and cleaned up the excess FIPG. I also installed the new waterpump and housing as well as the alt bracket, carrier bracket, motor mount support (that I modified as well), and the lower tranny dust shield. The bottom end is almost completely assembled now, I'm finishing up modifying my water hardlines tomorrow and sending them off with the powdercoat items.
