Toyota MR2 Message Board - View Single Post - Stock Speaker Sizes, Locations, Pin Outs, and Harness P/Ns

mrturrari · 10-07-2009, 02:56 AM

The stock rear speakers in my 93 were 3-1/2" - no premium sound system. Aftermarket 3-1/2" speakers fit right in without modification.

If you are willing to cut and bend you can go pretty big though like Monopolizedinc mentioned earlier. I have JBL 5-1/4" in the rear and they are 125W RMS and 500W Peak, not a small speaker by any means. Just had to remove the bracket for the stock speaker and maybe bend something out of the way and drill new mounting holes. I also managed to put a 6-1/2" in the door which is a 150W RMS and 600W Peak. Had to cut metal to make it fit and also trim the inside of the plastic cover. Also both sets came with a pair of 1" titanium tweeters that fit just fine in the stock location without any modification.

10-07-2009, 02:56 AM	#30 (permalink)
mrturrari I <3 my 5sfe Join Date: Mar 2005 Location: Salt Lake City, Utah Posts: 655 Thanks: 2 Thanked 170 Times in 113 Posts iTrader Rating: (0/0% )	The stock rear speakers in my 93 were 3-1/2" - no premium sound system. Aftermarket 3-1/2" speakers fit right in without modification. If you are willing to cut and bend you can go pretty big though like Monopolizedinc mentioned earlier. I have JBL 5-1/4" in the rear and they are 125W RMS and 500W Peak, not a small speaker by any means. Just had to remove the bracket for the stock speaker and maybe bend something out of the way and drill new mounting holes. I also managed to put a 6-1/2" in the door which is a 150W RMS and 600W Peak. Had to cut metal to make it fit and also trim the inside of the plastic cover. Also both sets came with a pair of 1" titanium tweeters that fit just fine in the stock location without any modification. Last edited by mrturrari; 10-07-2009 at 03:21 AM..