i have not had a time to up date in a bet so here it is for those still reading the pistons are in but i found out the used crank im using is a regrind so i had to order .50 over bearings for it they will be Wednesday at the earliest the porting on the head is almost done and the header is being modded to fit like it should every body here (4agte) using the ebay 20v header should take a look at the ports there are different it does bolt right on but the ports are 1/4 inch and #1 is really fare off it barely seals the body work is at a stand still because the heat in my shop broke
http://www.mr2.com/forums/attachment...1&d=1255274298http://www.mr2.com/forums/attachment...1&d=1255274979