Toyota MR2 Message Board - View Single Post

Papo J · 10-13-2009, 08:37 AM

That is the C160 you guys are talking about, the C60 is the Celica/Vibe/Matrix tranny.

IDon'tKnow, the selector shaft procedure only applies if the tranny is from a Vibe or Matrix, those are different than the Celica in that respect. You will also need to replace the input shaft bearings on the bell housing to the Celica bearings so that it lines up correctly and you will also need MK2 NA axles.

10-13-2009, 08:37 AM	#6 (permalink)
Papo J 6SPD GTE Join Date: Sep 2006 Posts: 589 Thanks: 2 Thanked 50 Times in 49 Posts iTrader Rating: (0/0% )	That is the C160 you guys are talking about, the C60 is the Celica/Vibe/Matrix tranny. IDon'tKnow, the selector shaft procedure only applies if the tranny is from a Vibe or Matrix, those are different than the Celica in that respect. You will also need to replace the input shaft bearings on the bell housing to the Celica bearings so that it lines up correctly and you will also need MK2 NA axles.