Quote:
Originally Posted by sabing
running two subs off a 4 chan isnt usually a good idea. Unless you use two channels per sub then use your deck for the speakers.. For 2 channels bridged to power 2 subs the amp would need to be pretty crazy. Some people don't know it but underpowering a sub can blow it out just as easily as overpowering it. Check out crutchfield.com for wiring diagrams on how to achieve different ohm loads
|
Running at the wrong frequency is what kill speakers.
Ive run 1000 watts rms into a factory 5 inch driver with out killing it . All frequencies below 800 hz were removed.
Half a watt with a 50 hz signal in a tweeter will kill it
wrong frequency is the main reason equally followed by not enough power as distortion will be the out come because of the need for extra loudness
BTW my competiton cars tweeter are run with 1000 watts rms
BY BIG AMPS