Quote:
Originally Posted by halo434321
I am very interested in doing this project. I already have the new tail lights but do not have the center piece. Is there anyone out there with suggestions on where to get this part? Any links or company names would be a great help.
|
What are you looking for, an OEM Center panel or a Carbon Fiber one?
If you want an OEM one, hit up Aaron @ Litha Toyota of Springfield (forum vendor).
Here's a link to Lithia's sub forum
Lithia Toyota of Springfield - Toyota MR2 Message Board
If you want a Carbon one, try these guys
For a Carbon one with Reverse Light Holes
CarBen Fibre Creations - Rev3+ Rear Centre Panel With Reverse Light Holes In Carbon
For a Carbon one with Shaved Reverse Lights
CarBen Fibre Creations - Rev3+ Rear Centre Panel In Carbon
Also, if you want a black or white fiberglass one with Reverse light holes (the picture will show the carbon one, but this link is for the fiberglass one
CarBen Fibre Creations - Rev3+ Rear Centre Panel With Reverse Light Holes In Fibreglass
If you don't already have the OEM Rev 3 retainer brackets mentioned above, you'll need to get them too. I've quoted that post below for easy reference.
Quote:
Originally Posted by datguydeni
did you get mounting brackets?
i believe they are part #s
76826-17010 - Retainer (bracket), RH
76827-17010 - Retainer (bracket), LH
should be roughly 15-20$ for each bracket at your local dealer.
9.95 each from lithia
http://www.mr2.com/forums/lithia-toy...light-set.html |