Closer pics of the head (Details are....1mm oversized Ferrea valves intake and exhaust, 10.5mm lift 268 duration cams, 1zz shimless buckets, Crower titanium retainers, engle valve springs, 3 angle valve job, bowl blended, smoothed intake and exhaust ports, polished combustion chamber, all exhaust studs were time-serted.)
Assembled, head tq'd to 75 foot pounds using a progressive sequence of 25 then 50 then 75. I then backed off one nut at a time reseated the stud and retorqued them to 75ft lbs 2 more times.
