|
There is very little wiring depending on how you decide to go with engine managment. The basic setup only need the BTM wired in and the MAP switched. thats just about 2 hours and 5 wires.
If it is better to swap a 3sgte is up to you personaly. In the long run you will spend just a little more on a swap, but will have more horsepower and be done in a weekend. With the 5sfte you will have a ongoing project and much more knowledge about engines than when you started. Anyone can just swap, I chose to take the less traveled road and see if I could get good power and not blow up. You can.
|