Toyota MR2 Message Board - View Single Post - 3S-GTE JDM 3rd Gen Turbo Engine NEED measurement of gen3 rear brake disc

CJMR2T · 10-29-2009, 11:04 AM

Im pretty sure that the bell flange thickness is 6.5mm. Im designing my own BBK (F&R) at the moment, and from what all I can find, the gen 3 brakes are the same as the 93-95 gen 2 brakes here (U.S.). That being said, All of them here (again, U.S.) have a 6.5mm flange thickness.....

Side note... In the past, I have found that DBA (Disc Brakes Austraila) is very accurate with thier rotor specs and them matching specs that I have personally measured myself and list the rear for 93-00 as being 280mm dia, 46.5mm height, and 22mm thick; all of which are matching very closely to the specs you got.

Hope this helps.... Let me know if you need anything else and I'll see what I can do / come up with....

10-29-2009, 11:04 AM	#5 (permalink)
CJMR2T Fabricator Join Date: Oct 2009 Location: Lakeland, FL Posts: 3,685 Thanks: 3 Thanked 355 Times in 336 Posts iTrader Rating: (4/100% )	Im pretty sure that the bell flange thickness is 6.5mm. Im designing my own BBK (F&R) at the moment, and from what all I can find, the gen 3 brakes are the same as the 93-95 gen 2 brakes here (U.S.). That being said, All of them here (again, U.S.) have a 6.5mm flange thickness..... Side note... In the past, I have found that DBA (Disc Brakes Austraila) is very accurate with thier rotor specs and them matching specs that I have personally measured myself and list the rear for 93-00 as being 280mm dia, 46.5mm height, and 22mm thick; all of which are matching very closely to the specs you got. Hope this helps.... Let me know if you need anything else and I'll see what I can do / come up with....