|
when you checked it in the "start" position you showed power, but in the "run" (or "on") position you didn't?
if you didn't have it bridged at that moment, the afm is what turns the FP on... and the afm flapper door has to be open if not in the "start" position.... the vacuum of the engine trying to start will open the AFM flapper door and turn the pump on.... make sure the AFM is connected... turn the key to "on" and then push open the flapper door with your finger (remove the air filter/box)... you should hear the pump come on... if you don't, then there is a problem.
|