Toyota MR2 Message Board - View Single Post

wp23n · 11-01-2009, 05:30 PM

he replaced the Master Cylinder, bled the brakes and after that, A problem started.

This is what he says happens: When engine starts there is a slight hesitation, and some mis-firing. Then as engine warms, it really starts to buck and kick.

Then he did cap, rotor, wires, plugs and fuel filter hoping that would remedy this new problem. this didnt help

Today he checked timing belt alignment on the camshafts.

other than a new cap and rotor The distributor and timing hasn't been touched.

anyone have any ideas?

11-01-2009, 05:30 PM	#1 (permalink)
wp23n Head Flunkie Join Date: Oct 2008 Location: NJ Posts: 39 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	friend of mine needs help he replaced the Master Cylinder, bled the brakes and after that, A problem started. This is what he says happens: When engine starts there is a slight hesitation, and some mis-firing. Then as engine warms, it really starts to buck and kick. Then he did cap, rotor, wires, plugs and fuel filter hoping that would remedy this new problem. this didnt help Today he checked timing belt alignment on the camshafts. other than a new cap and rotor The distributor and timing hasn't been touched. anyone have any ideas?