Toyota MR2 Message Board - View Single Post - 3S-GTE USDM Turbo Engine Transmission swap

karl · 11-09-2009, 11:30 PM

i bet someone cut the spd sensor input to the ecu to disable the speed limiter. do you have cruise? and if so, does it work?

if so, there's nothing wrong with the sensor. the signal is tee'd to the CC and the ECU. the ECU doesn't do anything important with it.

i'd just swap over the mech sensor and be done with it. maybe check the wiring to the ECU.

11-09-2009, 11:30 PM	#4 (permalink)
karl slowbie Join Date: May 2006 Location: robbinsdale, MN Posts: 546 Thanks: 2 Thanked 54 Times in 42 Posts iTrader Rating: (0/0% )	i bet someone cut the spd sensor input to the ecu to disable the speed limiter. do you have cruise? and if so, does it work? if so, there's nothing wrong with the sensor. the signal is tee'd to the CC and the ECU. the ECU doesn't do anything important with it. i'd just swap over the mech sensor and be done with it. maybe check the wiring to the ECU.