It's been a slow couple of nights in project land because I spend Sunday and Monday night looking at a potential V6 donor car. Unfortunately Alex and I couldn't get it to run. Turns out that some jackass who pulled a couple of parts out of the car previously also cut the body harness and therefore the fuel pump wasn't getting any power. Ooops. Guess I'll be looking at other donor cars.
Anyway, here's where I'm at/what I've gotten done.
I got the speaker surround bits and associated cloth pieces finished.
I also pulled this rats nest of a non-factory alarm out.
It turns out that other than a vampire clamp going to the ignition that none of the wires routed through the firewall actually went anywhere. Nice.
Also used my neighbors table saw to build out most of a sub box.
I decided to put the front at a slight angle...just because. As such I'll need to trim up the top a bit. I didn't feel like doing that tonight so I assembled the rest of the box and I'll take care of attaching the top and cutting the hole for the speaker tomorrow. I know I'm supposed to do the speaker hole first, but whatever. I wanted the thing completely done before I started screwing around with that as I didn't want the sub to line up incorrectly.
Also (not pictured) got the dash support in and the amp for the sub wired up. Tomorrow I should be able to test out the sound system and start putting things back in the car.
More to come!