Toyota MR2 Message Board - View Single Post

Sang · 11-17-2009, 02:11 AM

I highly, highly doubt it does. Looks like ben had to use a gauge adapter like this with a -6AN female to -6AN male with 1/8NPT port that basically T's into it.

No disrespect to the TRD regulator...but you'd really be much better off with a more widely used unit like an aeromotive, sx, weldon, et cetera. They are easily rebuildable by buying new diaphragms from summit and most come with a port directly on the regulator for mounting a gauge.

11-17-2009, 02:11 AM	#32 (permalink)
Sang Turtle Join Date: Jul 2006 Location: FL Posts: 4,096 Thanks: 18 Thanked 267 Times in 246 Posts iTrader Rating: (5/100% )	I highly, highly doubt it does. Looks like ben had to use a gauge adapter like this with a -6AN female to -6AN male with 1/8NPT port that basically T's into it. No disrespect to the TRD regulator...but you'd really be much better off with a more widely used unit like an aeromotive, sx, weldon, et cetera. They are easily rebuildable by buying new diaphragms from summit and most come with a port directly on the regulator for mounting a gauge.