Quote:
|
Originally Posted by turbomr2.
I just did this. If you have the instructions look at type B. I believe it goes like this:
Blue -- Black
White -- Gray
Black x2 -- White x2
|
I dont have the instructions but I after studying it closely I think you are right.
Here how the wires go.
On the stock sensor the wires match up like this to the connector.
brown/yellow on connector = the black wire on the 02 sensor (heater)
red/yellow on the connector = the other black wire on the 02 sensor (heater)
solid black on the connector = the blue wire on the 02 sensor it self is the +
solid brown on the connector = the white wire on the 02 sensor it self is the -
So there for you would be correct.
Ok so just in case it's wrong wich I really doubt. What would happen if I connected it was wrong? Woul I blow my ECU?.
On the Bosch 02 sensor the wire go like this
2 white wires are the 12v
black is EGO + signal
Gray is EGO - signal
So it the wires would connect like this.
2 blk to the 2 white ones
blue to black
white to gray
Just like you said.
